Model IGAT-90 Pool LIft

Model IGAT-90

In-Ground Automatic 90° Seat Turn

Features

-Independent Operation

-Automatic 90 Degree Seat Turn**

-Powered by Water Pressure

-Lifts up to 400 LBS. at 55-65 PSI while operating, which equals approximately 60 PSI static pressure when measured at the faucet or hose.*

-Vertical Seat Travel - 42"

-Installs in Deck Socket

-Portable (Lift Out and Roll Away)

-Can be Padlocked in Seat-Up Position

* Note that the pressure requirement for a faucet or hose connection is approximately 10% higher to achieve our rated load.

** Opposite facing (opposite turn) and heavy-duty units available(custom charges may apply).

For those who can do a diagonal or front-pivot transfer, the Model IGAT-90 may be ideal. Access for transfer is best with small or no gutter. The seat rotates backward (counter-clockwise) into water, and forward when exiting. The standard seat has two arms. Refer to the Dimensional Worksheet for required dimensions when ordering.

Static pressure (measured at faucet or hose with no water flowing) is affected by variables in the material, length, diameter, and rigidity of the water lines and hoses from the street to the lift, and by how many other faucets are open at the same time. Operating pressure requirment (measured while lifting) is not affected by these variables.